Gutter installation cost
New seamless gutters and downspouts, priced by the foot, with removal of the old gutters. Typical total for the default job: $2,101 (range $1,263–$4,318).
| Line item | Low | Typical | High |
|---|---|---|---|
| Gutter material, hangers, end caps, sealant | $375 | $525 | $750 |
| Downspouts, elbows and outlets | $180 | $260 | $440 |
| Installer labor (crew hours) (12.5 h at $93/h) | $633 | $1,166 | $2,265 |
| Remove and haul away old gutters | $75 | $150 | $263 |
| Fascia repair allowance (if rot is found) | $0 | $0 | $600 |
| Total | $1,263 | $2,101 | $4,318 |
What drives the price
- Linear feet and number of downspouts
- Material: aluminum is the norm; steel and especially copper cost much more
- Two-story and steep roofs need more setup and safety work
- Rotten fascia boards found when old gutters come off
- 6-inch gutters and oversize downspouts for big or steep roofs
How this estimate is built
Equipment and material lines use typical retail prices for the item, checked against current listings. Labor is hours for this scope (our estimate, shown in each line) times a billed hourly rate: the national median wage for the trade from the U.S. Bureau of Labor Statistics, times 3.5 to cover what a contractor pays on top of wages (payroll taxes, insurance, vehicle, licensing, unbilled time) and profit, adjusted for your area. The low and high columns use cheaper or pricier equipment, fewer or more hours, and billing multiples of 2.5× and 5×. More on the method.
What people reported paying
Real quotes and bills people shared online. Each scope is different, so use them as a sense of range, not a benchmark.
- $7,200 quote: ~150 ft of 6-inch seamless gutters, ~120 ft of downspouts, steep metal roof and fascia work (California) (thread)
Questions
How much does gutters installation cost?
For the default job below, about $2,101, with a range of $1,263 to $4,318 depending on equipment, access and local labor rates. Change the inputs to match your job.
How do I measure gutter length?
Measure each roof edge (eave) that needs a gutter and add them up. A typical single-story house has 120 to 200 feet. Count one downspout for roughly every 30 to 40 feet of gutter.
Are seamless gutters worth it?
Seamless aluminum gutters are formed on site to the exact length, so there are joints only at corners. They leak less than sectional gutters and are the standard choice for installed gutters.
Sources
Other calculators: Water softener · Garage door · Garage door opener · Gutter guards · Toilet · Sump pump · Garbage disposal · 240V outlet · Recessed lighting